如果江苏SKF轴承光滑平稳，没有杂物和湿气进入，轴承油封就不会磨损。如果轴承在原进口轴承箱中打开，应及时看到反射轴承和油封。反映轴承附近的油封，以确保它们足以避免热液体、腐蚀性液体和气体沿轴线渗入。

If the SKF bearing of Jiangsu is smooth and stable, no bearing and moisture will enter, the bearing oil seal will not wear. If the bearing is opened in the original import bearing box, the reflective bearing and the oil seal should be seen in time. Reflect oil seals near bearings to ensure that they are sufficient to avoid infiltration of hot liquids, corrosive liquids and gases along the axis.

如果油封损坏，应尽快更换。重新考虑主动光滑系统，确保油或润滑脂进入江苏SKF轴承、SKF进口轴承，并确保添加量的准确性也反映了光滑剂是否能改变颜色或黑色。如果有这样的条件，那就是含有杂质的光滑剂，这种情况对轴承的使用也是有害的。

If the oil seal is damaged, it should be replaced as soon as possible. Reconsider the active smooth system to ensure that oil or grease enters the Jiangsu SKF bearing, SKF imported bearings, and ensures the accuracy of the added amount also reflects whether the smooth agent can change color or black. If there is such a condition, it is a smooth agent containing impurities, which is also harmful to the use of bearings.

然后，随着江苏SKF轴承理论经验的积累，我们可以进一步分析什么样的异常噪声对应于什么样的异常轴承。轴承存在多种异常噪声，难以传递。正常SKF进口轴的声音应是平均的、平滑的、非尖锐的，而轴承的异常声音有间歇性、冲击性或尖锐的声音。首先，施加正常轴承的声音，然后判断轴承的异常声音。

Then, with the accumulation of SKF bearing theory experience in Jiangsu, we can further analyze what abnormal noise corresponds to what kind of abnormal bearing. There are many kinds of abnormal noise in the bearing, which is difficult to transfer. The sound of the normal SKF import shaft should be average, smooth and non sharp, while the abnormal sound of the bearing has intermittent, impact or sharp voice. First, the sound of the normal bearing is applied, and then the abnormal sound of the bearing is judged.

事实上，江苏SKF轴承维修的机会是固定的。

In fact, Jiangsu SKF bearing maintenance opportunities are fixed.

也就是说，轴承得到了充分的应用，对损伤的详细判断方法如下：可详细判断进口轴承是否可修复。

That is to say, the bearing has been fully applied, and the detailed judgement method for damage is as follows: it can be used to determine whether the imported bearing can be repaired in detail.

1轴承载荷监测仪的应用是最方便可靠的方法。应用如江苏SKF轴承铁谱仪或SPM或i-ID—1轴承工作台监测仪器，修复轴承的形状和轴承的分辨率。当指针从警告区域到危险区域时，例如，当使用HD—1仪器时。

The application of the 1 axle load bearing monitor is the most convenient and reliable method. Applications such as Jiangsu SKF bearing Ferrograph or SPM or i-ID - 1 bearing table monitoring instrument, repair bearing shape and bearing resolution. When the pointer is from the warning area to the dangerous area, for example, when using the HD - 1 instrument.

在接收到江苏SKF轴承改进的平滑方法后，指针不返回，这显然是SKF导入自身的问题。此时，当未进入危险区域时，可以修复轴承。毕竟，离风险区有多远，维修的开始可以通过经验来调整。

After receiving the improved smoothing method of Jiangsu SKF bearing, the pointer does not return, which is obviously the problem of SKF import itself. At this point, when the danger area is not entered, the bearing can be repaired. After all, how far away from the risk zone, the beginning of maintenance can be adjusted through experience.

文章来自：江苏SKF轴承

The article comes from: Jiangsu SKF bearing

文章来自：江苏INA轴承

The article comes from: Jiangsu INA bearing

文章来自：江苏NSK轴承

The article comes from: Jiangsu NSK bearing